Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Screen Innovations Manuals
  4. Indoor Furnishing
  5. Nano Box
  6. Installation instructions manual

Screen Innovations Nano Box Installation Instructions Manual

24v dc - rts
Hide thumbs Also See for Nano Box:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
Enlarged version
Nano Box

Installation Instructions

Screen Innovations
9715-B Burnet Rd, Suite 400 Austin, TX 78758
24V DC - RTS
512.832.6939
www.screeninnovations.com
INSTALLERS: Please leave this manual with the owner.
PART NO. 400024
Version 1.1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Nano Box and is the answer not in the manual?

Questions and answers

Related Manuals for Screen Innovations Nano Box

Summary of Contents for Screen Innovations Nano Box

  • Page 1: Installation Instructions

    Nano Box Installation Instructions Screen Innovations 9715-B Burnet Rd, Suite 400 Austin, TX 78758 24V DC - RTS 512.832.6939 www.screeninnovations.com INSTALLERS: Please leave this manual with the owner. PART NO. 400024 Version 1.1...
  • Page 2 PARTS LIST - NANO BOX - 24V DC - RTS Shades Wall Brackets 275 Box 375 Box 475 Box Screws Included (3 per Bracket) Installation Remotes Leveling Shims Terminal Block Brackets (1 per RTS shade) (4 per shade) Spacer Blocks (optional - 4 per shade)
  • Page 3 SPACER BLOCKS AND LEVELING SHIMS (OPTIONAL) INSTALLATION - NANO BOX - 24V DC - RTS 1. Terminate pre-wire with the supplied terminal block. Spacer Blocks - used to clear an obstruction in the fabric path. Header + 24 VDC - 24 VDC...
  • Page 4 INSTALLATION - NANO BOX - 24V DC - RTS INSTALLATION - NANO BOX - 24V DC - RTS 4. Install terminal block bracket between jamb and wall bracket on the motor side using the 6. Hang shade onto wall brackets and center in opening...
  • Page 5 WIRING - NANO BOX - 24V DC - RTS PROGRAMMING - RTS PROGRAMMING STEPS (must follow in order) Warning: Do not 24V DC Step 1: Fine tune lower limit attempt to use any Step 2: Assign shades to groups installation remote until all Step 3: Pair groups to control system (Mylink, LinkPro) the shades are installed.
  • Page 6 TROUBLESHOOTING - RTS Tech Support: 512.832.6939 Problem Possible Cause Action to Take For RTS Ensure that 24Volt motors have 24V DC supply and Shade won’t operate. Motor is not powered. that the polarity is correct. When operating an RTS remote hold the buttons Remote button presses down for at least 2 seconds.