Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Screen Innovations Manuals
  4. Indoor Furnishing
  5. Nano Box
  6. Installation instructions manual

Screen Innovations Nano Box Installation Instructions Manual

24v dc - sdn
Hide thumbs Also See for Nano Box:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
Enlarged version
Nano Box

Installation Instructions

Screen Innovations
9715-B Burnet Rd, Suite 400 Austin, TX 78758
24V DC - SDN
512.832.6939
www.screeninnovations.com
INSTALLERS: Please leave this manual with the owner.
PART NO. 400025
Version 1.1

Advertisement

loading

Related Manuals for Screen Innovations Nano Box

Summary of Contents for Screen Innovations Nano Box

  • Page 1: Installation Instructions

    Nano Box Installation Instructions Screen Innovations 9715-B Burnet Rd, Suite 400 Austin, TX 78758 24V DC - SDN 512.832.6939 www.screeninnovations.com INSTALLERS: Please leave this manual with the owner. PART NO. 400025 Version 1.1...
  • Page 2 PARTS LIST - NANO BOX - 24V DC - SDN SPACER BLOCKS AND LEVELING SHIMS (OPTIONAL) Spacer Blocks - used to clear an obstruction in the fabric path. Shades Wall Brackets 275 Box 375 Box 475 Box Screws Included (3 per Bracket) Connect spacer blocks to shade brackets before installation.
  • Page 3 INSTALLATION - 24V DC - SDN INSTALLATION - 24V DC - SDN 1. Terminate pre-wire with the supplied terminal block. 3. Make sure the wall bracket lever is down (may already be down). Header + 24 VDC Proper position for installing Box - 24 VDC Data + Data For SDN Only...
  • Page 4 INSTALLATION - 24V DC - SDN WIRING - SDN 24V DC 5. Connect the shade and pre-wire connectors, then snap into the terminal block bracket Pre-wire Shade Marking Description Wire Gauge (AWG) Maximum Supported Wire Length (FT.) Positive 24VDC Negative 24VDC RS485 Positive RS485 Negative RS485 Ground...
  • Page 5 PROGRAMMING - SDN RJ45 DATA CABLE (FOR DATA HUB) SDN shades are programmed using the Screen Innovations SIFI via the web interface. This programming can be done with a Windows or Mac computer either over LAN or wired directly to SIFI.
  • Page 6 TROUBLESHOOTING - SDN NOTES Tech Support: 512.832.6939 Problem Possible Cause Action to Take Shade won’t Motor is not powered. Ensure that 24Volt motors have 24V DC supply and operate. that the polarity is correct. Check the wire pinouts and termination. Look for Incorrect or poor cable broken, loose, or damaged wires.