Table of Contents
Advertisement
INSTALLING GUIDE CABLES -
Run the larger crimped end of the guide cable up through the hole in the weight bar. Then slide over
the guide cable bracket in the case or attached to the motor end plate.
Zen Box - Cable - Installing guide cables
1
Pg 17
INSTALLING THE GUIDE CABLE MOUNTS -
Secure either the cable guide floor mount brackets or the cable guide wall mount brackets using
appropriate fasteners. Make sure that they are secured at a location such that the cables will be
plumb in both directions and parallel to each other. Note that the wall mount bracket can be installed
either on the wall or inside the columns as well as be flipped upside down if desired.
Zen Box - Cable - Installing the guide cable mounts
2
Pg 18
Advertisement
Table of Contents
