Summary of Contents for Screen Innovations Nano Roll 375 Series
Page 1
Nano Roll Installation Instructions Screen Innovations 9715-B Burnet Rd, Suite 400 Austin, TX 78758 120 VAC - RTS 512.832.6939 www.screeninnovations.com INSTALLERS: Please leave this manual with the owner. PART NO. 400031 Version 1.0...
Page 2
PARTS LIST - NANO ROLL - 120 VAC - RTS PARTS LIST - NANO ROLL - 120 VAC - RTS Shades Leveling Shims (optional) 375 Roll 475 Roll Wall Brackets (375 / 475) + End Caps ADDITIONAL ACCESSORIES - NANO ROLL - 120 VAC - RTS 5/16”...
Page 3
SPACER BLOCKS AND LEVELING SHIMS (OPTIONAL) INSTALLATION - 120 VAC - RTS (375 / 475 SERIES) Before installing the shades, verify whether the shade was ordered as standard roll or reverse roll. Though Spacer Blocks - used to clear an obstruction in the fabric path. illustrations in this manual show standard roll shades, the installation for reverse roll shades is the same.
Page 4
INSTALLATION - 120 VAC - RTS (375 / 475 SERIES) INSTALLATION - 120 VAC - RTS (375 / 475 SERIES) 3. Measure bracket to bracket width and verify it matches the ordered width. Adjust accordingly. 5. Push power cable into pre-wire hole Note: Brackets must be level before the Motor cable is not plenum...
Page 5
INSTALLATION - 120 VAC - RTS (375 / 475 SERIES) INSTALLATION - 120 VAC - RTS (375 / 475 SERIES) 7. Then put idler end cap over idler and snap into place. 8. Replace and fasten motor end cap Click! 1/8”...
PROGRAMMING - RTS TROUBLESHOOTING TROUBLESHOOTING - RTS Tech Support: 512.832.6939 Problem Possible Cause Action to Take PROGRAMMING STEPS (must follow in order) Warning: Do not Step 1: Fine tune lower limit attempt to use any For RTS Step 2: Assign shades to groups installation remote until all When the battery of a wire free motor is low the user Shade won’t operate.