Nano Roll Installation Instructions Screen Innovations 9715-B Burnet Rd, Suite 400 Austin, TX 78758 512.832.6939 WIREFREE www.screeninnovations.com INSTALLERS: Please leave this manual with the owner. PART NO. 400028 Version 1.0...
Page 2
PARTS LIST - NANO ROLL - WIREFREE Shades (275 Roll) Charger Spacer Blocks Leveling Shims Wall Brackets (optional) (optional) Ceiling Brackets Installation Remote (1 per shade) Screws Included (3 per Bracket) Parts List - Nano Roll - Wirefree Pg 1...
Page 3
SPACER BLOCKS AND LEVELING SHIMS (OPTIONAL) INSTALLATION - NANO ROLL - WIREFREE Spacer Blocks - used to clear an obstruction in the fabric path. 1. Install the wall bracket / end cap assemblies with the supplied screws for Ceiling Mount for Wall Mount Motor...
Page 4
INSTALLATION - NANO ROLL - WIREFREE INSTALLATION - NANO ROLL - WIREFREE 5. Then, while supporting motor side, put idler end cap over the idler and snap into place. 3. Remove the idler end cap with flat bladed screw driver 4.
Page 5
PROGRAMMING - RTS TROUBLESHOOTING - RTS Tech Support: 512.832.6939 Problem Possible Cause Action to Take PROGRAMMING STEPS (must follow in order) Warning: Do not Step 1: Fine tune lower limit For RTS attempt to use any Step 2: Assign shades to groups installation remote until all When the battery of a wire free motor is low the user Shade won’t operate.
Need help?
Do you have a question about the Nano Roll 275 Series and is the answer not in the manual?
Questions and answers