Technical Specifications; General Specifications; General Technical Specifications; A.1 General Specifications - Siemens Simatic S7 Series System Manual

Technical specifications

A.1

General specifications

A.1.1

General technical specifications

Standards compliance
The S7-200 SMART automation system complies with the following standards and test
specifications. The test criteria for the S7-200 SMART automation system are based on
these standards and test specifications.
CE approval
The S7-200 SMART Automation System satisfies requirements and safety related objectives
according to the EC directives listed below, and conforms to the harmonized European
standards (EN) for the programmable controllers listed in the Official Journals of the
European Community.
● EC Directive 2006/95/EC (Low Voltage Directive) "Electrical Equipment Designed for Use
within Certain Voltage Limits"
– EN 61131-2:2007 Programmable controllers - Equipment requirements and tests
● EC Directive 2004/108/EC (EMC Directive) "Electromagnetic Compatibility"
– Emission standard
– Immunity standard
The CE Declaration of Conformity is held on file available to competent authorities at:
Siemens AG
Sector Industry
DF FA AS DH AMB
Postfach 1963
D-92209 Amberg
Germany
S7-200 SMART
System Manual, 09/2015, A5E03822230-AC
EN 61000-6-4:2007 / AI:2011: Industrial Environment
EN 61000-6-2:2005: Industrial Environment
A
565