Changing The Fluid Needle - Krautzberger A-14 Operating Instructions Manual

Automatic spray gun A-14
7.4

Changing the fluid needle

Removing the fluid needle
1. Clean automatic spray gun (
Fig. 11: Removing the fluid needle
2.
WARNING!
The closing piece (Fig. 11/1) is under spring force!
Carefully unscrew the entire closing piece (Fig. 11/1).
3. Remove the spring (Fig. 11/2).
4. Take the entire valve shaft (Fig. 11/3) out of the main element (Fig. 11/4).
Fig. 12: Removing the fluid needle
5. Loosen the nut (Fig. 12/1) of the valve shaft pipe (Fig. 12/4).
6. Remove the spring (Fig. 12/2) and fluid needle (Fig. 12/3) from the valve shaft pipe
(Fig. 12/4).
Fig. 13: Check the seals
■ 200-0151
Ä Chapter 7.2 'Cleaning spray guns' on page 25)
ENGLISH
GB–27