System Configuration; Switching Facilities On/Off - Eaton i-on Compact Administration And User Manual

System configuration

The System Config menu allows you to change some parts of the system
to suit your particular needs.
Note: For normal users, the System Config menu contains only the Chime
and Level 4 Update options (see below).

Switching facilities on/off

System Config – Facilities On/Off can be used to switch the following
facilities on or off:
Chime
Remote Access
Level 4 Update
To switch facilities on or off:
Select System Config – Facilities On/Off .
1.
Use  or  to choose the facility, then  or  to switch it on or off.
2.
Press .
3.
User Menu Options
Use this option to enable or disable the chimes that
occur when a zone is triggered that has a Chime
attribute (as set up by the installer). For most zone
types, a chime occurs only when the system is unset.
A master user can use this option to enable or disable
remote access to the control unit from the web interface
or SecureConnect.
Note: By default, this feature is off for security reasons.
Make sure that any installer requesting access is your
authorised installer. Switch off remote access once the
installer has finished.
Use this option to enable or disable access to the
control unit from the level-4 user. There can be only one
level-4 user, which only the installer can create.
The level-4 user is able to:
a) Update the firmware and language files at the control
unit using the web interface.
b) Log into the user menu or web interface and change
the level-4 user name and code.
The level-4 user cannot perform other tasks, such as to
set or unset the system, omit zones, etc.
Page 37