Before Operating the Telephones
Power On/Off (KX-TPA60 only)
To turn the power of the handset on or off, press and hold
Power Save Mode
Power Save Mode turns off the ringer, LCD backlight, and/or key backlight automatically after a set
number of seconds have passed while receiving a call. For details about adjusting power save mode
settings, see "Incoming Option", Page 107.
Basic Operation
Basic operations for the KX-TPA65/KX-TPA68 are described here.
Going off- and on-hook
There are several ways to go off-hook and on-hook:
R Using the corded handset
R Using the
/[SP-PHONE],
R Using the soft key
Going off-hook
In this manual, when you see the phrase "off-hook", you can do any of the following:
R Lift the corded handset off its cradle.
R Press
/[SP-PHONE],
enables hands-free mode.
R Press
/[SP-PHONE],
R Press
/[LINE], and then press a dial key or [D]/[C] to select the line number.
Note
R Certain soft keys, such as
HEADSET] key.
Going on-hook
In this manual, when you see the phrase "on-hook", you can do any of the following:
R Replace the corded handset on its cradle.
R Press
/[SP-PHONE],
hands-free mode.
R Press
/[CANCEL].
56
/[SP-PHONE/HEADSET],
/[SP-PHONE/HEADSET] while the corded handset is on its cradle. This
/[SP-PHONE/HEADSET ] when using a headset.
Answer
/
, function like the
/[SP-PHONE/HEADSET] when using a headset or when you are in
.
/[CANCEL] key
/[SP-PHONE],
/[SP-PHONE/