Panasonic KX-TGP600G Operating Instructions Manual page 124

Hide thumbs Also See for KX-TGP600G:
Table of Contents

Advertisement

Appendix
Problem
The handset stops
working during
operation.
You cannot use the
handset/desk phone
during a power failure.
The headset does not
work.
Noise is frequently heard. Nearby electrical appliances are
Two short beeps are
heard during a
conversation.
The charge indicator
flashes red rapidly.
You charged the
batteries for 6 hours, but
the beep tones sound,
and
(needs to be
charged) flashes after a
few telephone calls.
While charging the
battery, the handset and
the AC adaptor feel warm.
"No Service" is
displayed, and beep
tones are heard.
124
Possible Cause
An unknown error has occurred. R Turn the handset off, and then
The handset/desk phone will
not function during a power
failure because the base unit
stops emitting radio waves.
A headset tone cannot be heard
when receiving an incoming call
when the headset is attached.
causing interference, or you are
too far from the base unit.
The radio signal is weak.
The charger is not connected
properly.
The battery charge contacts
may be dirty.
It is time to change the batteries. Replace with a new one.
These are normal conditions.
The handset/desk phone is out
of range.
The base unit or Server is out of
service.
Solution
turn it back on.
For details, see "Location of
Controls" on Page 20.
R Re-insert the battery and try
again.
For details, see "Battery
Installation" on Page 95.
R Make sure the headset tone
setting is set to "On". See
"Incoming Option" on Page 107.
R Make sure the headset jack is
connected properly. See
"Location of Controls" on
Page 20.
R Place the handset/desk phone
and base unit away from other
electrical appliances.
R Move closer to the base unit.
Move closer to the base unit.
R Make sure the battery is
inserted properly.
R Set the handset in the charger
properly.
R Contact your phone system
dealer/service provider.
Clean the battery charge contacts
without damaging them and
charge once more.
Move closer to the base unit or try
again later.
Contact your phone system dealer/
service provider.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents