Panasonic KX-TGP600G Operating Instructions Manual page 115

System Setting Menu Layout (when connected to the KX-TGP600)
Status
Sub Item
Line Status
Firmware Version
IP Mode
IPv4 Settings
IPv6 Settings
MAC Address
LLDP
CDP
VLAN
*1 If you select this item and press
*2 If this item is not set, "0.0.0.0" is displayed. If the base unit does not connect to the Ethernet, "..." is
displayed.
*3 If this item is not set, "0::0" is displayed. If the base unit does not connect to the Ethernet, "::" is
displayed.
Network Settings
The administrator password may be required for this setting. Contact your administrator for further
information. For available characters, see "Character Table for Administrator Password", Page 106.
Sub Item
IP Mode Select
Description
Displays the line status.
Selects which is shown on the
display the model number and
the firmware version.
Displays the IP network mode. IPv4/IPv6/IPv4&IPv6
Displays the information about
IPv4 settings.
Displays the information about
IPv6 settings.
Displays the MAC address of
the base unit.
Displays the LLDP status.
Displays the CDP status.
Displays the VLAN ID and
priority.
, the phone number of the selected line is displayed.
OK
Description
Changes the network settings
of the base unit. Current
settings are displayed as a
highlight.
Setting
*1
Registered /Registering
(NULL)
–Base Station
–Handset
*2
–IP Address
*2
–Subnet Mask
*2
–Default Gateway
*2
–DNS
*3
–IP Address
*3
–Prefix
*3
–Default Gateway
*3
–DNS
—
On/Off
On/Off
—
Setting
–IPv4
–IPv6
–IPv4&IPv6
Appendix
Default
*1 —
/
—
—
—
—
—
—
—
—
Default
IPv4
115