Panasonic KX-TGP600G Operating Instructions Manual page 94

Installation and Setup
KX-TPA68 (Desk phone)
Attach the AC adaptor, corded handset and headset to the desk phone.
KX-TGP600 (Base unit)
Connect the AC adaptor and the Ethernet cable to the base unit.
R If PoE is available, an AC adaptor is not needed.
R If you are using a PoE hub, the number of devices that you can connect simultaneously is limited by
the amount of power supplied by the hub.
R The initial setting for the KX-TGP600 IP address is "DHCP—Auto". For information about your network
environment, contact your administrator. For details, see "Network Settings", Page 115.
94
PQLV219xx
Hub
PQLV219xx