Registering/Deregistering A Handset/Desk Phone To The Kx-Tgp600 - Panasonic KX-TGP600G Operating Instructions Manual

Installation and Setup
After the base unit requests to start downloading the handset/desk phone software, you cannot enter any
keys.
The update is performed automatically. Follow the instructions on the LCD and wait until the update
finishes.
*1 KX-UDT series are not available for KX-TGP600LA, KX-TGP600LC, KX-TGP600AG or
KX-TGP600BR.
Note
R If you failed in the update, contact your administrator.
Registering/Deregistering a Handset/Desk Phone to the
KX-TGP600
Registering a Handset/Desk Phone to the KX-TGP600
You can register a handset/desk phone to up to 4 base units.
You can register a base unit to up to 8 handsets/desk phones (KX-TPA60/KX-TPA65/KX-TPA68/
*1
KX-UDT series ).
There are 2 types of registration method.
R Handset/desk phone registration using the base unit
R Handset/desk phone registration using the handset/desk phone
The supplied handset/desk phone and base unit are preregistered. If for some reason the handset/desk
phone is not registered to the base unit (for example, the signal strength is out of range even when the
handset/desk phone is near the base unit), re-register the handset/desk phone.
*1 KX-UDT series are not available for KX-TGP600LA, KX-TGP600LC, KX-TGP600AG or
KX-TGP600BR.
Handset/desk phone registration using the base unit
When adding a new handset/desk phone:
1. Base unit:
a. Press and hold the handset locator button for about 3 seconds.
The STATUS indicator on the base unit will flash red (slow flashing).
2. Unregistered handset/desk phone:
[When adding a new handset/desk phone]
R Easy registration
In standby mode, press and hold
After "Registered" displayed on the LCD, the registration is completed.
From step a to step e can be skipped.
[When registering a handset/desk phone to another base unit]
R Normal registration
a. /
MENU
b. KX-TPA60/KX-TPA65:
[D]/[C]/[F]/[E]:
KX-TPA68:
[D]/[C]: "System Settings"a
c. [D]/[C]/[F]/[E]:
d. [D]/[C]: "System Option"
100
OK
Menu
/
a
OK
OK
a
OK
*1
a
OK
until displaying "Please Wait...".