Panasonic KX-TGP600G Operating Instructions Manual page 117

System Settings
The administrator password may be required for this setting. Contact your administrator for further
information. For available characters, see "Character Table for Administrator Password", Page 106.
Sub Item
Register H/S
Cancel Register
Change Base PIN
*1
Set Time & Date
Repeater Mode
MultilineSetting
*5
Authentication
*6
Access Code
*7
Xsi Setting
*7
UC Setting
Parallel Setting
(KX-TPA65/
KX-TPA68)
*9
Restart (Base)
*1 Availability depends on your phone system. Contact your administrator for further information.
Description
Registers the handset/desk
phone selected from the list to
the base unit currently
connected.
Cancels the handset/desk
phone registration between
the handset/desk phone and
the base unit.
Changes the PIN (4 digits) of
the base unit.
Specifies the time and date of
the handset/desk phone.
Selects whether or not to use
the repeater.
Specifies the multiline mode.
Specifies the ID and password
for HTTP authentication.
Specifies the access code to
access the redirect server.
Specifies the ID and password
for the Xsi service.
Specifies the ID and password
for the Broadsoft UC service
(IM&P).
Register/deregister the paired
handset of the desk phone.
Restart the base unit.
Setting
Select the handset/desk
phone.
Select the handset/desk
phone.
Enter PIN
¯
Enter New PIN
¯
Verify New PIN
—
On
Off
*2
Incoming Call
Line 1–8
Handset 1–8
*3
Outgoing Call
Handset 1–8
Line 1–8
*4
Default Line
*5
–ID
*5
–Password
Max. 16 characters
Line 1–8
*5
ID
*5
Password
Handset 1–8
*5
ID
*5
Password
Master Handset
*8
Pairing
Mode
Busy
Take Over Call
Yes
No
Appendix
Default
—
—
1234
—
Off
Incoming Call:
Handset 1–8
Outgoing Call:
Line 1–8
Default Line:
Line 1
Not stored
Not stored
Not stored
Not stored
Pairing: Off
—
117