R To enter characters, see "Entering Characters", Page 54.
R You can confirm that the number was dialed correctly before calling (Predialing) by entering the
R To clear an entire number while predialing,
/[XFER/CLR] for more than 1 second.
/[TRANSFER/CLEAR] for more than 1 second.
R To cancel dialing, press
flashes, move closer to the base unit and dial again.
R To insert a 3 second pause between phone numbers, press
It is useful when you want to operate voice mail service without listening to pre-recorded
announcement, for example. Repeat as needed to create longer pauses.
*1 This soft key is displayed only when configured on the telephone. Contact your administrator for
Calling by Dialing
2. Dial the outside party's number.
: End the call
On-hook: End the call
To dial a new number without going on-hook, follow the procedure below.