To A Base Unit Other Than The Kx-Tgp600 - Panasonic KX-TGP600G Operating Instructions Manual

Using the Phonebook
Note
R Steps 8 and 9 can be omitted if you do not want to assign a category.
R Steps 10 and 11 can be omitted if you do not want to assign a default number. (The first number
entered for an entry will automatically be assigned as the default number.)
R The valid digits are "0" through "9", "G", "B", "J", "P".
R If an item with the same name and number exists, the new information added will be merged with the
existing item.
R To enter characters, see "Entering Characters", Page 54.
R When connected to a base unit other than the KX-TGP600, a menu to select the save destination of
the phonebook is displayed between steps 3 and 4.
Editing a Stored Item in the Handset Phonebook
Editing a Stored Item
[In standby mode]
1.
2. [D]/[C]: "Phonebook" a
3. Enter the name or the first character(s) of the desired name. a
4. [D]/[C]: Select the desired item. a
5. [D]/[C]: "Edit" a
OK
6. [D]/[C]: Select the desired name, phone number, category or default telephone number. a
7. Edit the data as necessary. a
8. Repeat step 6 to 7 and edit the items you want to change.
Save
9. /
SAVE
*1 If only Handset Phonebook is permitted, this step is skipped.
Note
R To change a character or digit.
1. Press [F] or [E] to highlight a character or digit.
2. Delete the character or digit.
KX-TPA60:
/ /[XFER/CLR]
KX-TPA65/KX-TPA68:
/ /[TRANSFER/CLEAR]
3. Enter the new character or digit.
R To clear an entire line.
KX-TPA60:
Press and hold
KX-TPA65/KX-TPA68:
Press and hold
R To move the cursor to the left or right, press [F] or [E], respectively.
R For details about entering characters, see "Entering Characters", Page 54.
Editing Category Names
You can edit the names of the categories in the phonebook.
[In standby mode]
Menu
1. / /
MENU
76
*1
OK
/
OK
/ /[XFER/CLR] for more than 1 second.
/ /[TRANSFER/CLEAR] for more than 1 second.
/ Menu
MENU
OK
OK