Panasonic KX-TGP600G Operating Instructions Manual page 46

Before Operating the Telephones
LINE Key
The LINE Key can be used either to seize a line in order to make or receive a call. In standby mode,
press the LINE key to display a list of available lines. The color of each line number indicates the status
of the line or the status of the function assigned to the key. The icon displayed on the next line shows the
status of each line. Lines that are available can be changed using Multiline Setting. See "System
Settings", Page 117.
However, when connecting to a base unit other than the KX-TGP600, you can only seize a line using this
key. You cannot check the status of the lines.
[Example] (KX-TPA60/KX-TPA65)
R When connected to a KX-TGP600
R To select a key, press [D] or [C] to select the desired key. a
R If you press a dial key when displaying the line status, only the limited line is displayed.
R The line name can be changed. Contact your administrator for further information.
*1
Status Indication
Status
Color Light pattern
Green On
Slow Flashing
Quick Flashing
Red On
Slow Flashing
Quick Flashing
Off —
*1 The meanings of these colors of key numbers vary depending on the status of the outside line.
46
"In Use"
R You are on a call.
"Line On Hold"
R A call is on hold.
"Incoming Call/Recall"
R A call (including Hold Recall) is being received.
"In Use"
R A shared line is in use or on private hold at another unit.
"Line On Hold"
R A shared line is on hold at another unit.
"Incoming Call"
R A call to a shared line is being received.
"Free"
R The line is idle.
"<n>Free"
R A shared line is idle.
OK
Meaning