Download  Print this page

Incoming/outgoing Call Log - Panasonic KX-TGP600G Operating Instructions Manual

Hide thumbs


[D]/[C]: "Ringer Volume"a
3. [D]/[C]: Select the desired setting. a
*1 When using a KX-TPA65/KX-TPA68, the volume can also be adjusted by using
R You can press the [D] key instead of performing steps 1 and 2.
R For details about setting the ringer pattern, see "Incoming Option", Page 107.
Adjusting the Ringer Volume or Turning the Ringer Off while Ringing
While receiving a call, do the following to adjust the ringer volume or turn the ringer off:
R If you attach a headset while receiving an incoming call, the ring from the handset does not switch to
the headset. If you attach a headset before receiving an incoming call, and headset ringer is set to
"On", ringing will be heard from the headset.
To adjust the ringer volume
1. [D]/[C]: Adjust the volume.
2. KX-TPA60:
*1 The adjusted volume level will also be used for subsequent calls.
When using a KX-TPA65/KX-TPA68, the volume can also be adjusted by using
To turn the ringer off

Incoming/Outgoing Call Log

When connecting the desk phone and handset in parallel, the Incoming/Outgoing Call Log is shared
between the desk phone and handset. For details about parallel connection settings, see "Parallel Mode
(KX-TPA65/KX-TPA68)", Page 52.
Displaying the Incoming Call Log
[In standby mode]
1. [F]
2. [D]/[C]: "Incoming Log" a
*1 If "Missed Calls" is not displayed on the LCD in standby mode, this step can be skipped.
When connected to a base unit other than the KX-TGP600, since "Incoming Log" is not displayed,
select from "Missed Call"/"Answered Call".
R For details about the other operations, see "Screen Transition Diagram", Page 48.
Displaying the Outgoing Call Log
[In standby mode]
1. [C]
*1 You can also press
/[XFER/CLR]: Exit
Before Operating the Telephones


Table of Contents

   Also See for Panasonic KX-TGP600G

Comments to this Manuals

Symbols: 0
Latest comments: