Installation And Setup - Panasonic KX-TGP600G Operating Instructions Manual

Installation and Setup

Note
R Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out
of improper installation or operation inconsistent with this documentation.
WARNING
R To reduce the risk of fire or electric shock, do not overload AC outlets and extension cords.
R Completely insert the AC adaptor/power plug into the AC outlet. Failure to do so may cause electric
shock and/or excessive heat resulting in a fire.
R Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet,
then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc.
resulting in a fire.
Attaching the Stand (KX-TPA65/KX-TPA68)
Attach the stand to the desk phone.
1. Insert the stand into the hooks located in the unit.
2. Gently rotate the stand in the direction indicated until it is released.
Example: KX-TPA65
Adjusting the Stand Position (KX-TPA65/KX-TPA68)
Push the PUSH marks in the direction indicated, with both hands, and tilt the stand until it becomes fixed
in the desired position.
R High Position ® Low Position
Installation and Setup
91