Starting An Application; Application Instance List; Application Instance List > Edit - Patton SmartNode 10100 Series User Manual

SmartNode 10100 Series User Manual
2. The Application Instance List is displayed in the information panel.
Applications are displayed in one of three states:
– Run (application is operating)
– Management (application is installed but not in operation)
– Fault (application has an operation fault)

Starting an Application

In order to be able to load and start an application, it must be installed on the Smart Media application server.
In addition, at least one Smart Media unit must have been configured on the Smart Media application server so
that you are able to connect to it.
When you first log on to the Web Portal, your system application will have been installed on the Smart Media
application server, and it will be in a management state. This means that the application is not yet operating
and controlling your system. In order to start an application, its state must be changed from Management to
Run. To start an application:
1. Select from the navigation panel.
Instances
2. Select the application that you wish to run and click
Working with Configurations
Figure 26. Application Instance List
Edit
Figure 27. Application Instance List > Edit
3 • Initial Setup and Web Management
.
37