Table of Contents
Advertisement
4-11-2 Loading Scene Files
Follow the procedure below.
1
Follow the instructions in steps 1 to 3 described in "4-7-9
Confirming the Image of the Return Video Signal on the
Viewfinder" on page 4-93 to display the SCENE FILE page of the
FILE menu.
The SCENE FILE page appears.
2
Load the scene file.
To load the scene file stored in the camcorder
Move the t mark to the desired file No., and push the MENU
knob.
The s which is displayed at the left of the file No. changes to x.
The camcorder is set up according to the loaded scene file.
To cancel the selected scene file
Move the t mark to x, and push the MENU knob. x changes to
s.
The camcorder returns to the settings before selecting the scene file.
,
Chapter 4 Adjustments and Settings for Recording
4
(Continued)
4-145
Advertisement
Table of Contents
