Table of Contents
Advertisement
3
Turn the MENU knob to move the t mark to LENS FILE
SELECT, and push MENU knob.
The t mark at the left of the selected item changes to the z mark
and the z mark at the left of the setting changes to the ? mark.
4
Turn the MENU knob until the lens file No. in use appears, and push
the MENU knob.
The z mark changes to the t mark and the ? mark at the left of the
lens No. changes to the z mark.
The selected lens file is loaded.
Not to use the lens file:
Select OFF.
5
To end menu operations, set the MENU ON/OFF switch to OFF.
The menu disappears from the viewfinder screen, and the display
indicating the current status of the camcorder appears along the top
and bottom of the viewfinder screen.
Chapter 4 Adjustments and Settings for Recording
4
4-117
Advertisement
Table of Contents
