Table of Contents
Advertisement
15
Turn the MENU knob to move the t mark to PRE-LIGHTING
16
Push the MENU knob.
The t mark at the left of PRE-LIGHTING changes to the z mark
and the z mark at the left of the setting changes to the question
mark.
17
Push the MENU knob clockwise or counterclockwise until the
desired time to turn on the light before starting recording appears.
If you turn the MENU knob clockwise or counterclockwise, the
PRE-LIGHTING time changes in order of OFF y 2SEC y
5SEC y 10SEC.
Note
• To turn on the light automatically before starting recording by
setting the PRE-LIGHTING item to ON, be sure to set the LIGHT
switch to AUTO. Also, set the switch of the light connected to the
LIGHT connector to on.
The light automatically turns on and off in auto interval rec mode.
However, if the duration when the light should be off is less than 5
seconds, the light is on continuously.
• When the LIGHT switch is set to MANUAL and the switch of the
light is set to on, the light is always on.
Chapter 3 Recording and Playback
3
(Continued)
3-33
Advertisement
Table of Contents
