Table of Contents
Advertisement
5
Push the MENU knob.
The t mark at the left of LOOP/INTVAL REC changes to the z
mark and the z mark at the left of the setting changes to the ? mark.
6
Turn the MENU knob clockwise or counterclockwise until LOOP
appears.
If you turn the MENU knob clockwise or counterclockwise, the
setting changes in order of OFF y LOOP y A INT y M INT.
When LOOP appears, the camcorder is in the Loop Rec mode where
picture, sound, and time code are constantly saved in memory. The
TALLY lamp (green tally) is on while the picture data is being
stored in the memory.
Chapter 3 Recording and Playback
3
(Continued)
3-23
Advertisement
Table of Contents
