Table of Contents
Advertisement
wg GENLOCK IN (genlock input) connector (BNC type)
This connector inputs an HD reference signal when the camera is to be
genlocked or when the time code is to be synchronized with external
2
equipment. Use the MAINTENANCE menu to adjust the genlock H-
phase (phase of Horizontal sync signal).
For details, refer to the Maintenance Manual.
This connector also inputs the NTSC/PAL composite video signal as the
reference signal when the time code is to be synchronized with external
equipment. In this case, the genlock H-phase cannot be adjusted. Beyond
that, the subcarrier of the down-converted signal (composite video
signal) cannot be synchronized with external equipment when the
HKDW-702 (not supplied) is installed.
2-25
Chapter 2 Locations and Functions of Parts and Controls
Advertisement
Table of Contents
