Table of Contents
Advertisement
4 HOLD (display hold) button
Pressing this button instantly freezes the time data displayed in the
counter display section. (The time code generator continues normal
2
operation.) Pressing this button again releases the hold. One use of this
feature is to determine the exact time of a particular shot.
When the HOLD button is activated, the time data is displayed in the
following format:
See "2-8 Warnings and Indications on the Display Panel" on page 2-41 for more
information about the counter display.
5 RESET (counter reset) button
This button resets the time data displayed on the counter display section
to "00:00:00:00" and the user bit data to "00000000".
6 DISPLAY (LCD) switch
CTL: Control signal
TC: Time code
DATA: The item selected by the DATA DISPLAY switch.
For more information, see "Time code displays" on page 2-43.
7 ADVANCE button
For setting the time code, user bits, or real time, each press of this button
increments the flashing digit selected by the SHIFT button.
8 SHIFT button
For setting the time code, user bits, or real time, this button selects the
digit to be changed. The selected digit flashes.
2-35
Chapter 2 Locations and Functions of Parts and Controls
Advertisement
Table of Contents
