Table of Contents
Advertisement
8
To end the menu operation, set the MENU ON/OFF switch to OFF.
The menu disappears from the viewfinder screen and the message
"MANU INTERVAL *FRAME" indicating manual Interval Rec
mode appears along the bottom of the viewfinder.
*FRAME indicates the number of frames set in step 6.
The display indicating the current status of the camcorder appears
along the top and bottom of the viewfinder.
Note
The setting for manual Interval Rec mode are maintained until changed.
However, if you switch off camcorder power, manual Interval Rec mode
is cleared except for the NUMBER OF FRAME setting. To use manual
Interval Rec function again after switching on the power, perform steps 1
to 2.
Camcorder operation in manual Interval Rec mode
Follow the procedure below to shoot the picture in manual Interval Rec
mode after turning on manual Interval Rec mode and making the
required settings.
1
After performing the basic procedure for shooting and recording,
following the instructions in "3-2-1 Basic Procedure" (page 3-6) ,
secure the camcorder so that it will not move.
Chapter 3 Recording and Playback
3
(Continued)
3-41
Advertisement
Table of Contents
