Table of Contents
Advertisement
3
Adjust the LEVEL controls corresponding to the channel selected in
step 1 so that at the maximum sound level, the level meter indicates
-18 dB (segment above 20 segment). The second bar from the top
may turn on occasionally, but do not allow the top bar to go on. If it
goes on, the audio level is too high.
These bars go on.
Normal input level
Using the LEVEL (CH-1/CH-2) controls
You can select the audio level controls to be used for adjusting the level
of the audio signals input to the AUDIO IN CH-1/CH-2 connectors on
the VTR MODE-2 page of the MAINTENANCE menu.
At the factory
setting
Audio level
LEVEL (CH-1)
to the CH-1
control
Audio level
LEVEL (CH-2)
to the CH-2
control
Corresponding peak value
0
Off
10
20
30
40
1
Example 1
MIC LEVEL
control
MIC LEVEL
control
Chapter 4 Adjustments and Settings for Recording
Those bars go on.
2
Excessive input level
Example 2
The MIC LEVEL control is
linked with LEVEL (CH-1)
control
The MIC LEVEL control is
linked with LEVEL (CH-2)
control
4
(Continued)
4-29
Advertisement
Table of Contents
