Testing The Automatic Audio Level Adjusting - Sony HDW-750CE Operation Manual

9
Turn on the LIGHT switch and check that the display panel is
illuminated.
10
Hold down the REW button to rewind the tape for a while, then
press the PLAY button. Check that the rewind and playback
functions operate normally.
11
Press the STOP button and press the F FWD button. Check that the
fast forward function operates normally.

(2) Testing the automatic audio level adjusting

functions
1
Set the AUDIO IN CH-1 and CH-2 switches to FRONT.
2
Set the AUDIO SELECT CH-1 and CH-2 switches to AUTO.
3
Set the CH-1/2 / CH-3/4 switch to CH-1/2.
4
Aim the microphone connected to the MIC IN connector at a
suitable sound source. Check that the level indications for both
channels 1 and 2 correspond to the sound level.
5
Set the AUDIO IN CH-3 and CH-4 switches to F.
6
Set the CH-1/2 / CH-3/4 switch to CH-3/4.
7
Aim the microphone connected to the MIC IN connector at a
suitable sound source. Check that the level indications for both
channels 3 and 4 correspond to the sound level.
8
Be sure to reset the CH-1/2 / CH-3/4 switch to CH-1/2 after
checking the channels 3 and 4.
Chapter 6 Maintenance
6
6-7