Table of Contents
Advertisement
The ? mark is displayed to the left of P00 at the top left of the
window. In this case, you can change the page.
2 Turn the MENU knob until the page which contains the desired
file No. appears, and push MENU knob.
3 Turn the MENU knob to move the t mark to the desired file
No., and push MENU knob.
,
The message "MEMORY STICK ACCESS " appears.
When the loading is completed, the message "COMPLETE!"
appears. The camcorder is set up according to the loaded scene file.
If the file No. of the file where no data is stored, NO FILE is
displayed in the column of that file.
To cancel the loading
Before pushing the MENU knob in step 3, move the t mark to
ESC at the right top of the window by turning the MENU knob and
push the MENU knob.
The SCENE FILE page appears again.
,
Chapter 4 Adjustments and Settings for Recording
4
4-147
Advertisement
Table of Contents
