Warnings And Indications On The Display Panel - Sony HDW-750CE Operation Manual

2-8 Warnings and Indications
on the Display Panel
Tape status, battery status, and level indicators
Audio channel level meter: When the CH-1/2 / CH-3/4 switch is
set to CH-1/2, the audio channel level 1 is displayed.
When the CH-1/2 / CH-3/4 switch is set to CH-3/4, the audio
channel level 3 is displayed.
PB VITC NDF EXT-LK
H MIN
TAPE E
BATT E
RF SERVO
Battery status indicator
BATT
Nearly dead: "BATT" flashes.
Dead battery (battery must be charged):
"BATT" and "E" flash.
Tape status indicator
TAPE
Close to end: "TAPE" flashes.
End (tape must be replaced):
"TAPE" and "E" flash.
Tape status, battery status, and level indicators
OVER EMPH
HOLD
V
H
10
SEC FRM
20
B
30
F
40
HUMID SLACK
PEAK dB
E
E
Chapter 2 Locations and Functions of Parts and Controls
Audio channel level meter:
When the CH-1/2 / CH-3/4
switch is set to CH-1/2, the
OVER
audio channel level 2 is
0
displayed.
When the CH-1/2 / CH-3/4
switch is set to CH-3/4, the
audio channel level 4 is
displayed.
Fully charged
Full (at beginning)
F
B
2-41
2