Loading Scene Files - Sony MSW-900P Operation Manual

4-11-2 Loading Scene Files

Follow the procedure below.
1
Follow the instructions in steps 1 to 3 described in "4-7-9
Confirming the Image of the Return Video Signal on the
Viewfinder" on page 4-93 to display the SCENE FILE page of the
FILE menu.
4
The SCENE FILE page appears.
2
Load the scene file.
To load the scene file stored in the camcorder
Move the t mark to the desired file No., and push the MENU
knob.
The s which is displayed at the left of the file No. changes to x.
The camcorder is set up according to the loaded scene file.
To cancel the selected scene file
Move the t mark to x, and push the MENU knob. x changes to
s.
The camcorder returns to the settings before selecting this scene file.
4-144
Chapter 4 Adjustments and Settings for Recording
04 SCENE FILE
1 :AAAAAAAAAAAAA
2 :BBBBBBBBBBBBB
,
3 :CCCCCCCCCCCCC
4 :DDDDDDDDDDDDD
5 :NO FILE
STANDARD
SCENE RECALL
SCENE STORE
F.ID :
: EXEC
: EXEC