Table of Contents
Advertisement
The following table shows the approximate number of seconds worth of
picture data (counting back from the time you begin recording) that will
be recorded from memory. However, when changing from SAVE to
STBY, or under the special situations explained in the notes on this page,
the actual amount of data recorded may be shorter.
3
Loop Rec time
7 (seconds)
(for 59.94I format)
8 (seconds)
(for 50I format)
6 (seconds)
5 (seconds)
4 (seconds)
3 (seconds)
2 (seconds)
1 (seconds)
0 (seconds)
Notes
• After selecting the Loop Rec mode, immediately changing the Loop
Rec time or performing playback or recording review, the picture data
stored in memory before this operation are made to be unrecordable.
This means that when you press the VTR START button or VTR
button on the lens, the previously stored picture data will not be
recorded.
3-20
Chapter 3 Recording and Playback
Loop Rec time setting and recording start point
VTR STBY mode
About 7 seconds before
About 8 seconds before
About 6 seconds before
About 5 seconds before
About 4 seconds before
About 3 seconds before
About 2 seconds before
About 1 seconds before
About 0 seconds before
VTR SAVE mode
About 4 seconds before
About 5 seconds before
About 4 seconds before (for
59.94I format)
About 5 seconds before (for
50I format)
About 4 seconds before (for
59.94I format)
About 5 seconds before (for
50I format)
About 4 seconds before
About 3 seconds before
About 2 seconds before
About 1 seconds before
About 0 seconds before
Advertisement
Table of Contents
