Sierra Wireless FX30S User Guide
Rev 2 Mar.18
Internet of Things (IoT) Expansion Card
The FX30S is compatible with single slot, category 1 (14 mm maximum), power
category 1 and 2 IoT Expansion cards. The IoT connector has 38 pins and
supports the following interfaces:
•
1 × ADC
•
4 × GPIO
•
1 × I2C
•
1 × PCM
•
1 × SPI
•
1 × UART
•
1 × USB
•
1 × SDIO
For IoT Expansion Card Developers
When developing an IoT Expansion card to use with the FX30S, be aware that
the distance between the front SMA end plate and PCA front edge is 1.89 mm.
Front end plate
Front end plate
Front PCA edge
1.89 mm
Front end plate to front PCA edge
Figure 3-7: IoT Expansion Card Alignment
62
XSEC0001
Section XSEC0001 - XSEC0001
XSEC0001
41110485