Fault Indication; Ordering Spare Parts - ESAB Origo A2 Instruction Manual

GB
2

FAULT INDICATION

If the lamp:
-- flashes The control panel has lost
contact with the power unit.
-- is steadily lit The thermal overload trips
have operated.
The mains voltage to the
power unit is too high.
The LED glows / flashes as long as the fault is detected, and it can only be reset if the fault is repaired
or the machine restarted.
3

ORDERING SPARE PARTS

Note!
All guarantee undertakings from the supplier cease to apply if the customer himself
attempts any work in the product during the guarantee period in order to rectify any
faults.
Spare parts may be ordered through your nearest ESAB dealer, see the last page of
this publication.
bi06d1ea
Cause
S
S
S
- - 8 - -
Action
Check the cables. It will be necessary to turn off
the power supply to reset the system.
Check to see if the air filter is clogged.
Check the mains voltage. It will be necessary to
turn off the power supply to reset the system.