Yaesu FTDX101D Operation Manual page 88

HCUT SLOPE
Function: Sets the slope of the high-frequency
cutoff audio filter in AM mode.
Available Values: 6dB/oct / 18dB/oct
Default Setting: 6dB/oct
AM OUT SELECT
Function: AM signal output band setting from
RTTY/DATA jack.
Available Values: MAIN / SUB
Default Setting: MAIN
Description: Select the band to output the AM
signal.
AM OUT LEVEL
Function: Sets the level of the receive AM signal
output from the RTTY/DATA jack.
Available Values: 0 - 100
Default Setting: 50
TX BPF SEL
Function: Selects the audio passband of the DSP
modulator on the AM mode.
Available Values: 50-3050 / 100-2900 / 200-2800
300-2700 / 400-2600 (Hz)
Default Setting: 50-3050 Hz
AM MOD SOURCE
Function: Selects the microphone input jack for
AM mode.
Available Values: MIC / REAR
Default Setting: MIC
Description:
MIC: Audio is input from the MIC jack on the
front panel.
REAR: Disables the microphone circuit on the
front panel and inputs audio/data from the
USB jack or RTTY/DATA jack on the rear
panel.
MIC GAIN
Function: Sets the microphone gain for the AM
mode.
Available Values: MCVR / 0 - 100
Default Setting: MCVR
Description:
MCVR: Adjust the microphone gain (0 - 100) us-
ing the front panel [MIC/SPEED] knob.
0 - 100: Fixed to the set value.
86
REAR SELECT
Function: Selects the input jack of the AM signal.
Available Values: DATA / USB
Default Setting: DATA
Description: Selects the input jack of the AM sig-
nal when "AM MOD SOURCE" is set
to "REAR".
DATA: Inputs from the RTTY/DATA jack on the
rear panel.
USB: Inputs from the USB jack on the rear pan-
el.
RPORT GAIN
Function: Sets the level of the AM signal input
when "AM MOD SOURCE" is set to
"REAR".
Available Values: 0 - 100
Default Setting: 50
RPTT SELECT
Function: Sets the PTT control for the AM trans-
mit signal.
Available Values: DAKY / RTS / DTR
Default Setting: DAKY
Description:
DAKY: Controls the AM transmit signal from the
RTTY/DATA jack (pin 3) on the rear panel.
DTR: Controls the AM transmit signal from the
USB virtual COM/DTR ports.
RTS: Controls the AM transmit signal from the
USB virtual COM/RTS ports.