Table of Contents
Advertisement
8.15 Control Box for Electric Control Units
The control box for EC/ECS controls should be mounted at a convenient
place in the tractor cab. The control box has 4 screw holes in the back
cover, which need to be drilled out for mounting on a flat surface. There
should be a minimum of a 8 amp fuse protecting this circuit.
Power requirement is 12 volt DC.
Note polarity:
Brown
positive (+)
Blue
negative (-)
Use the optional HARDI
Electric 12 volt outlet box
(No. 817925) if more than
one power outlet is required.
12-volt junction box for 12-volt hook-up: EC/ECS controls,
HARDI PILOT, boom hydraulic controls, etc.
HARDI
Fig. 43
®
EAGLE 3PT BOOM OPERATORS MANUAL
59
Advertisement
Table of Contents
