Adjusting The Rear Cable - Hardi EAGLE 3PT Boom Operator's Manual

6.10 Adjusting the Rear Cable

WARNING: THE REAR CABLES CAN BREAK AND INJURE YOU OR
1. Raise the boom to its highest position. Fold the boom to transport
position with the tilt cylinders fully extended. Make sure the fold
cylinders are pressurized and that the boom is folded all the way in.
2. Shut the tractor off.
3. Ensure the boom transport stop arms are in contact with the outer
wing. Adjust if necessary.
4. Loosen the jam nuts on the turnbuckle. Adjust (tighten) the
turnbuckle so that the outer wing section contacts the boom
transport stop bracket. Tighten the turnbuckle another four complete
turns and retighten the jam nuts.
40
SOMEONE ELSE IF TENSIONED WHEN THE BOOM IS
UNFOLDED. ALWAYS ADJUST FRONT CABLE FIRST
WITH THE BOOM UNFOLDED INTO OPERATING
(SPRAYING) POSITION.
HARDI ® EAGLE 3PT BOOM OPERATORS MANUAL