Adjustments; Adjustments & Maintenance Intervals - Hardi EAGLE 3PT Boom Operator's Manual

6.0 ADJUSTMENTS

WARNING:
• HARDI CANNOT ASSUME RESPONSIBILITY OR BE HELD
LIABLE FOR ANY LOSS OR DAMAGE THAT OCCURS DUE TO
LACK OF ADJUSTMENTS OR MAINTENANCE.
• WE URGE YOU TO FOLLOW THE ADJUSTMENT AND
MAINTENANCE RECOMMENDATIONS FOR EVERYONE'S
SAFETY.
• MAKE IT A DAILY HABIT TO INSPECT YOUR BOOM FOR NEED
OF ADJUSTMENT OR MAINTENANCE.
• IMMEDIATELY REPLACE ANY PARTS ON THE BOOM THAT
ARE WORN OR BROKEN.
• ALWAYS CLEAN YOUR BOOM BEFORE ADJUSTING IT TO
AVOID UNNECESSARY CONTACT WITH CHEMICALS.
The boom wing sections on the Eagle 3 point boom have been pre-
assembled, adjusted and tested in the factory. The boom however, will
require additional adjustments shortly after being taken into service (10
hours) and thereafter on a minimum annual basis to perform at its
maximum levels.
To further insure the booms proper performance, the Eagle 3 point boom
also has to be maintained on a regular basis.
PLEASE FOLLOW THE SUGGESTED MAINTENANCE INTERVALS.
Perform the adjustment procedures in the same sequence as they are
written in this manual.
6.1 Adjustment And Maintenance Intervals
IMPORTANT: To maximize boom life and performance, retighten all
boom fasteners and inspect boom for proper adjust-
ment after the first 10 hours of use. Thereafter adjust
the boom at a minimum of once a year and check all
fasteners at 50 hr. intervals. Lubrication of the boom
should be done daily to ensure maximum perfor-
mance and life.
HARDI ® EAGLE 3PT BOOM OPERATORS MANUAL 33