Control Box For Esc-Controls - Hardi MEGA 230 Operator's Manual

5.9 Control Box for ESC-Controls

The control box for ESC-Controls should be mounted at a convenient
place in the tractor cab. The control box has 4 screw holes in the back
cover, which need to be drilled out for mounting on a flat surface, using
the mount plate, bracket, and hardware furnished with the sprayer.
Power requirement is 12V DC. There should be a 8amp fuse protecting
this circuit. Note polarity.
Brown pos. (+), Blue neg. (-)
Fig. 16
(12-volt junction box for 12-volt hook-up for ESC controls, foam marker,
boom hydraulic controls, etc)
Use the optional HARDI Electric 12 volt outlet box (No. 817925) if more
than one power outlet is required.
HARDI MEGA 230 / 350 CENTRIFUGAL OPERATORS MANUAL
29