Hardi EAGLE 3PT Boom Operator's Manual page 49

4. The two parts are shortened equally. Use a saw, and file the
profiles afterwards to remove burrs (Fig. 29).
5. Grease the profiles, and assemble male and female parts again.
6. Fit the shaft to tractor and sprayer pump.
Note: Female part towards tractor.
Fit the chains to prevent the protection guards from rotating with the
shaft (Fig. 30).
7. To ensure long life of the P.T.O. shaft, try to avoid working angles
greater than 15° (Fig. 30).
HARDI
Fig. 29
Fig. 30
® EAGLE 3PT BOOM OPERATORS MANUAL
min. 3/4" (20mm)
47