Adjusting The Center Section Cables - Hardi EAGLE 3PT Boom Operator's Manual

4.6 Adjusting the Center Section Cables

WARNING: NEVER ATTEMPT TO ADJUST THE CENTER CABLES
WITHOUT HAVING THE BOOM FOLDED ALL THE WAY INTO THE
TRANSPORT POSITION.
The center section cables work together to keep the center frame
square to the stationary frame, while folding boom in for transport or
when spraying with one side raised and folded (HT and HZ only).
1. Fold boom into transport position.
2. Shut the tractor off.
3. Check that the tilt cylinders are COMPLETELY EXTENDED. Adjust
if necessary (HT and HZ only).
4. Loosen jam nuts (C)(Fig 9).
5. Check that the cables are routed over the center section nozzle
mount brackets.
18
B
C
Fig. 9
HARDI ® EAGLE 3PT BOOM OPERATORS MANUAL
A
B C
A