Table of Contents
Advertisement
4.11 'DH' Hydraulics (Optional)
Note: This kit can only be used on tractors with 'closed center' hydraulic
systems.
Switch A operates:
Switch B operates:
Switch C operates:
Switch D operates:
A) Installation Of The 'DH' Hydraulic
Switch Box
1. Remove the joystick control handle
complete with bayonet style 12V plug
and 7 pin female plug
(if previously fitted).
2. Route the cable, with the 7 pins, from the hydraulic mount
plate to the tractor.
3. Mount the 'DH' hydraulic switch box in a suitable
location in the tractor cab.
4. Connect the bayonet plug from the switch box to a
12V power supply. HARDI recommends using
electronic distribution box #817925 to ensure a good
power supply to various 12V attachments.
Note polarity:
5. Connect the female 7 pin plug from the switch box to the 7 pin male
plug from the sprayer.
4.12 Performing Final Inspection
1.
Check hydraulic system for leaks.
2.
Check hydraulic hoses for clearance and freedom of movement
throughout entire range of operation.
3.
Lubricate all machine lubrication points. (Section 7.0)
4.
Adjust machine for field operation.
5.
Ensure all fasteners are tightened correctly.
HARDI
Left hand fold cylinder
Right hand fold cylinder
Left hand tilt cylinder
Right hand tilt cylinder
BROWN WIRE = POSITIVE (+)
BLUE WIRE = NEGATIVE (-)
®
EAGLE 3PT BOOM OPERATORS MANUAL
Fig. 11
23
Advertisement
Table of Contents
