Maintenance Of Triplets (When Fitted) - Hardi EAGLE 3PT Boom Operator's Manual

The O-rings need to be lubricated ALL THE WAY AROUND before fitting
on to the nozzle tube.
HARDI recommends using a vegetable based oil to prolong the life of the
O-ring.

7.9 Maintenance of Triplets (when fitted)

Every 50 hours the triplets should be disassembled removed and cleaned.
This is done by pulling out the stainless clip on the side of the triplet
assembly. Clean the bottom part as well as the top part thoroughly. Coat
the O-ring with a light film of vegetable oil if the sprayer is to be stored for
a long period of time.
If the triplets are not cleaned regularly they will not rotate readily and
possible damage to them may occur.
WARNING: NEVER SERVICE YOUR CONTAMINATED NOZZLES
44
Fig. 25
WITHOUT WEARING CHEMICAL RESISTANT GLOVES
AND SAFETY GOGGLES.
HARDI ® EAGLE 3PT BOOM OPERATORS MANUAL
Fig. 24