Configuring Email Settings - HIKVISION DeepinMind iDS-6700NXI Series User Manual

The user name and password should be assigned by your ISP.
Step 4 Click Save.

4.3.5 Configuring Email Settings

The device can be configured to send an Email notification to all designated receivers if an alarm
event is detected, e.g., motion detection event, video loss, tamper-proof, etc.
Before you start
 Before configuring the Email settings, the device must be connected to a local area network
(LAN) that maintains an SMTP mail server. The network must also be connected to either an
intranet or the Internet depending on the location of the e-mail accounts to which you want to
send notification.
 Please configure the DNS Server settings under Configuration > Network > Basic Settings >
TCP/IP before using the Email function.
Step 1 Enter the Basic Network Settings (Configuration > Network > Basic Settings > TCP/IP) to set
the parameters.
Step 2 Go to Configuration > Network > Advanced Settings > Email to enter the Email settings
page.
DeepinMind Series NVS User Manual
Figure 4-14 Email Settings
36
iDS-67 00 Deep inMind Ser ies NVS User Manua l