Configuring Email - HIKVISION DS-7100NI-E1 Series User Manual

4. Click the Apply button to save and exit the interface.

9.2.5 Configuring Email

Purpose:
The system can be configured to send an Email notification to all designated users if an alarm event is detected,
etc., an alarm or motion event is detected or the administrator password is changed.
Before configuring the Email settings, the NVR must be connected to a local area network (LAN) that maintains
an SMTP mail server. The network must also be connected to either an intranet or the Internet depending on the
location of the e-mail accounts to which you want to send notification.
Steps:
1. Enter the Network Settings interface.
Menu >Configuration> Network
2. Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the Preferred DNS Server in the Network
Settings men.
3. Click Apply to save the settings.
4. Select the Email tab to enter the Email Settings interface.
Network Video Recorder User Manual
Figure 9. 12 Configure More Settings
Figure 9. 13 Network Settings Interface
134