Assigning Functions To Assignable Switches - Sony Digital betacam DVW-970 Operation Manual

Item Description
COLOR FINE Adjusts the value more precisely if the
<A> adjustment by WARM-COOL <A> is
not satisfactory.
OFFSET Turns the setting of the offset for
WHITE <B> channel B ON or OFF. ON: Adds the
offset adjusted on this page to the
white balance.
WARM-COOL Sets the offset for the white balance
<B> of channel B, using the color
temperature. Adjust the value while
looking at the real image because
error tends to be bigger for
adjustment of high color temperature.
COLOR FINE Adjusts the value more precisely if the
<B> adjustment by WARM-COOL <B> is
not satisfactory.
4
Set the WHITE BAL switch to the position
corresponding to the desired channel (A or B).
Note
If the WHITE BAL switch is not set to A or B when
you operate the camcorder, the adjustment value will
not be reflected in the output signal.
5
Turn the MENU knob to move the
you want to set, and press MENU knob.
b
The mark on the left of the selected item changes to
a z mark, and the z mark on the left of the setting
changes to a ? mark.
6
Turn the MENU knob to change the setting, and press
the MENU knob.
The z mark returns to a
returns to a z mark.
To set other items, go back to step 3.
To set the other white balance channel, go back to step
2.
7
To end the menu operation, set the MENU ON/OFF
switch to OFF or close the cover of the menu operating
section.
Note
When using the OFFSET WHITE function, "+" is
displayed as the WARM color temperature indication and
"-" is displayed as the COOL temperature indication in the
viewfinder.
90
Adjustments and Settings from Menus
b
mark to the item
b
mark, and the ? mark
5-3-5 Assigning Functions to
Assignable Switches
You can assign the desired function to the ASSIGN 1/2
switches and the TURBO GAIN button.
Proceed as follows:
1
Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the
viewfinder screen.
2
Turn the MENU knob until the FUNCTION 1 page
appears, then press the MENU knob to select to page.
The current settings of each item appears on the right
of the item.
FUNCTION 1 page
U03
TURBO SW
CACHE/INTVAL REC
Item Description
ASSIGN SW <1> Assigns the function to ASSIGN 1
(push-type) switch.
ASSIGN SW <2> Assigns the function to ASSIGN 2
(slide-type) switch.
TURBO SW Assigns the function to the TURBO
GAIN button.
3
Turn the MENU knob to move the
corresponding to the switch to which you want to
assign the function, and press the MENU knob.
The corresponding ASSIGN SEL window appears.
ASSIGN <1> SEL window
ASSIGN <1> SEL ESC
OFF
PICTURE CACHE ON/OFF
TEST OUT CHARACTER
MARKER
RE-TAKE
ATW
RETURN VIDEO
LENS RET
REC SWITCH
TURBO SWITCH
TURBO
b
mark to the item