Loading A Scene File - Sony Digital betacam DVW-970 Operation Manual

P01 SCENE STORE
DISPLAY MODE
001.SCENE1
002.SCENE2
003.NO FILE
004.SCENE4
005.SCENE5
***.5FILE SAVE
3
Turn the MENU knob to move the
SAVE B MEM1-5," and press the MENU knob.
The message "SAVE OK? YES
P01 SCENE STORE
SAVE OK?
DISPLAY MODE
001.SCENE1
002.SCENE2
003.NO FILE
004.SCENE4
005.SCENE5
***.5FILE SAVE
4
To carry out the save, move the
press the MENU knob.
To cancel, press the MENU knob leaving the
pointing to "NO."
When the save is completed, the message
"COMPLETE" appears.
5
To end the menu operation, set the MENU ON/OFF
switch to OFF.
Note
If files have been saved in the page selected in step 2, those
files are replaced with files loaded from the camcorder
memory. For example, files from 001 to 005 are replaced.
Setting the file ID
Before the data is saved as a scene file, it is useful to set a
file ID to identify it. The set file ID is saved together with
the data.
To set the file ID, proceed as follows:
1
On the SCENE FILE page, turn the MENU knob to
b
move the mark to "F. ID."
F04 SCENE FILE
s1
s2
s3
s4
s5
sSTANDARD
SCENE RECALL
SCENE STORE
F.ID:
2
Press the MENU knob.
A character table appears, allowing you to select
characters you want to enter.
106
Saving and Loading Scene Files
ESC
: ALL
FEB/05/02
FEB/06/02
FEB/08/02
FEB/08/02
MEM1-5
b
mark to "5FILE
b
NO" appears.
ESC
YES NO
: ALL
MEM1-5
b
mark to "YES" and
b
TOP
:STANDARD
:STANDARD
:STANDARD
:STANDARD
:STANDARD
: EXEC
: EXEC
3
Carry out the operations for steps 4 and 5 described in
5-2-7 "Setting the Shot ID" (page 83) to enter the file
ID.
Note
Set the file ID before saving the scene file in the
"Memory Stick" or the camcorder memory.
Otherwise, the file ID is not saved with the other data.
4
When you finish entering the file ID, turn the MENU
knob to move the x mark to "END," then press the
MENU knob.
The SCENE FILE page appears again.
mark
Carry out the procedure from step 3 in 6-2-1 "Saving
a Scene File" (page 104).
The set file ID is saved together with the data.
Selecting the display contents
You can select the items of file information to be displayed
on the SCENE STORE pages (P01 to P20) or the SCENE
RECALL pages (P01 to P20) used for saving data to or
loading data from a "Memory Stick."
For details, see "Selecting the display contents" on page
103.

6-2-2 Loading a Scene File

Proceed as follows:
1
In the TOP menu, select the FILE menu.
2
Turn the MENU knob until the SCENE FILE page
appears, then press the MENU knob to select the page.
Alternatively, on the CONTENTS page select
"SCENE FILE," and press the MENU knob to display
the SCENE FILE page.
F04 SCENE FILE TOP
!#$%&'()*+,-./012345678
9:;<=>?@ABCDEFGHIJKLMNOP
QRSTUVWXYZ[Y]abcdefghijk
lmnopqrstuvwxyz~
INS DEL RET ESC END
sSTANDARD
SCENE RECALL : EXEC
SCENE STORE : EXEC
F.ID: x
F04 SCENE FILE TOP
s1 :STANDARD
s2 :STANDARD
s3 :STANDARD
s4 :STANDARD
s5 :STANDARD
sSTANDARD
SCENE RECALL : EXEC
SCENE STORE : EXEC
F.ID: SCENE21