Setting The Date/Time Of The Internal Clock - Sony Digital betacam DVW-970 Operation Manual

Operation of the assignable switches when UA01
to UA10 are assigned
When an on/off switchable function (or menu item) is
assigned to one of the assignable switches, each time the
switch is pressed toggles the function on or off.
When another type of menu item is assigned, pressing the
switch displays the item and its setting value on the
viewfinder screen.
You can then change the setting by pressing and turning the
MENU knob.
The viewfinder screen display disappears approximately 3
seconds after the last operation.
5-3-6 Setting the Date/Time of the
Internal Clock
You can set or change the date and time of the internal
clock. The date and time set are reflected in the time code.
Proceed as follows:
1
Holding down the MENU knob, move the MENU ON/
OFF switch to ON.
The TOP menu appears.
2
Turn the MENU knob to move the
"DIAGNOSIS," and press the MENU knob.
If this is the first time the DIAGNOSIS menu has been
displayed, the CONTENTS page appears. If the menu
has been used before, the last accessed page appears.
3
If the CONTENTS page is displayed, turn the MENU
b
knob to move the
the MENU knob to display the TIME/DATE page.
If a different page is displayed, turn the MENU knob
until the TIME/DATE page appears, then press the
MENU knob to select the page.
b
The
mark is displayed at "ADJUST."
TIME/DATE page
D02 TIME/DATE
ADJUST
HOUR
MIN
SEC
YEAR
MONTH
DAY
4
Press the MENU knob.
The TIME ADJUST setting window appears.
92
Adjustments and Settings from Menus
b
mark to
mark to "TIME/DATE," and press
: EXEC
: 12
: 55
: 58
: 00
: 07
: 31
TIME ADJUST
HOUR
MIN
SEC
YEAR
MONTH
DAY
OK
Item Description
HOUR Sets the hour value.
MIN Sets the minutes value.
SEC Sets the seconds value.
YEAR Sets the year.
MONTH Sets the month.
DAY Sets the day.
5
Turn the MENU knob to move the
you want to set, and press MENU knob.
b
The mark on the left of the selected item changes to
a z mark, and the z mark on the left of the setting
changes to a ? mark.
6
Turn the MENU knob to display the desired value, and
press the MENU knob.
The z mark returns to a
returns to a z mark.
7
To continue the remaining settings, repeat steps 5 and
6.
8
When you finish settings, turn the MENU knob to
b
move the mark to "OK," then press the MENU knob.
The internal clock is set with the date and time set in
steps 5 to 7. The TIME/DATE page of the
DIAGNOSIS menu appears again. The time set on the
TIME ADJUST setting window is displayed.
To cancel the setting
Before executing step 8, move the
top right of the window and press the MENU knob.
Alternatively, push the CANCEL/PRST / ESCAPE switch
down to the ESCAPE side.
All settings or changes are discarded and the TIME/DATE
page of the DIAGNOSIS menu appears.
ESC
: 12
: 55
: 58
: 00
: 07
: 31
b
mark to the item
b
mark, and the ? mark
b
mark to "ESC" at the