Sony Digital betacam DVW-970 Operation Manual page 148

Sony digital camcorder operation manuals dvw-970, dvw-970p
Hide thumbs Also See for Digital betacam DVW-970:
Table of Contents

Advertisement

No.
Page
M07
AUDIO-3
148
Menu List
Item
Settings
AU SG (1kHz)
ON/OFF/AUTO
MIC CH1 LEVEL
SIDE1/FRONT/
F+S1
MIC CH2 LEVEL
SIDE2/FRONT/
F+S2
REAR1/WRR
SIDE1/FRONT/
LEVEL
F+S1
REAR2/WRR
SIDE2/FRONT/
LEVEL
F+S2
Default
Description
OFF
Sets whether to output a 1 kHz test tone
during the Color Bar mode or not.
ON: a 1 kHz test tone is output during the
Color Bar mode.
OFF: a 1 kHz test tone is not output during
the Color Bar mode.
AUTO: a 1 kHz test tone is output only when
the CH 1 AUDIO SELECT switch on the
inside panel is in the AUTO position.
FRONT
When recording the front microphone sound
on CH 1, select which control is to be used for
the level adjustment.
SIDE 1: Adjust it with the LEVEL control (left
side) on the side panel.
FRONT: Adjust it with the MIC LEVEL control
on the front panel.
F + S1: It can be adjusted using either the
LEVEL control (left side) or the MIC
LEVEL control. (The two controls are
linked to each other.)
FRONT
When recording the front microphone sound
on CH 2, select which control is to be used for
the level adjustment.
SIDE 2: Adjust it with the LEVEL control (right
side) on the side panel.
FRONT: Adjust it with the MIC LEVEL control
on the front panel.
F + S2: It can be adjusted using either the
LEVEL control (right side) or the MIC
LEVEL control. (The two controls are
linked to each other.)
SIDE 1
Selects any of these controls to adjust the
audio level of the equipment that is connected
to the wireless microphone and whatever is
connected to the AUDIO IN CH1 connector
on the rear panel.
SIDE 1: Adjust it with the LEVEL control (left
side) on the side panel.
FRONT: Adjust it with the MIC LEVEL control
on the front panel.
F + S1: It can be adjusted using either the
LEVEL control (left side) or the MIC
LEVEL control. (The two controls are
linked to each other.)
SIDE 2
Selects any of these controls to adjust the
audio level of the equipment that is connected
to the wireless microphone and whatever is
connected to the AUDIO IN CH2 connector
on the rear panel.
SIDE 2: Adjust it with the LEVEL control (right
side) on the side panel.
FRONT: Adjust it with the MIC LEVEL control
on the front panel.
F + S2: It can be adjusted using either the
LEVEL control (right side) or the MIC
LEVEL control. (The two controls are
linked to each other.)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digital betacam dvw-970pMsw-970Msw-970pDvw-970Dvw-970p

Table of Contents